Sign up for SMS to get $100 off. Learn more

All Metal Ships Flat Rate Nationwide

Building Kits Ship Free

BLACK FRIDAY SITEWIDE SALE: UP TO 30% OFF

Dark corrugated metal roofing panels, blurred as background

What PBS Direct Ships to New York

Metal Roofing Panels and Building Kits Shipped to New York

PBS Direct ships metal roofing panels, wall siding, pole building kits, trim, and accessories to New York job sites for a flat rate of $249, from the dairy country of the North Country to the Finger Lakes and Long Island. Building kits ship free anywhere in the state. There are no shipping quotes to wait on and no order minimums. Browse, order, and get it delivered.

  • Flat-rate shipping

    $249 on panels and trim to New York

  • Building kits ship free

    Anywhere in New York

  • Custom panel lengths

    Cut to the exact length you order

  • Financing available

    $35 to $30,000 through ShopPay

Shipping to New York

PBS Direct does not currently operate a pickup location in New York, so all orders ship directly to your address. Metal roofing, siding, and trim ship for a flat rate of $249 regardless of panel count, and every building kit ships free. You will see the full total at checkout before you order, with no shipping quote to wait on. If you have questions about lead times or delivery to your site, call the team at 1-877-398-8898.

Building in New York: What to Plan For

New York packs an enormous range into one state, from the lake-effect snow belts east of the Great Lakes to the milder Hudson Valley and Long Island. Across most of the state, snow load is the headline design factor.

  • Most of New York uses the statewide Uniform Code

    The Residential Code and Building Code of New York State, based on the International Building and Residential Codes and referenced to ASCE 7, apply statewide and are administered by local code enforcement officials. New York City is the exception, running its own separate construction codes, so a project in the five boroughs follows a different rulebook.

  • Lake-effect snow drives the design

    Ground snow loads swing widely, from roughly 20 to 30 psf on Long Island and in the lower Hudson Valley to some of the heaviest loads in the country on the Tug Hill Plateau east of Lake Ontario, where figures well above 100 psf are common. Buffalo, Syracuse, and the Adirondacks all carry high loads. Values adjust with elevation, and unbalanced drift loads from wind-driven snow are a real design factor, so confirm your site figure before ordering.

  • Deep frost and a statewide severe weathering rating

    The whole state falls in the severe weathering category, and frost depth generally runs 42 to 48 inches, deeper in the North Country. Footings and piers for a pole building need to reach the local frost line. Ice barrier underlayment and a snow-shedding metal roof both help against the ice dams a long upstate winter produces.

  • A strong agricultural base

    New York is a leading dairy state and a major apple and grape producer, so dairy barns, equipment storage, and produce and cold-storage buildings are common across the Mohawk Valley, the Finger Lakes, and western New York. Metal panels on the roof and walls hold up against the moisture and temperature swings that wear out wood-sided farm buildings.

What PBS Direct Ships to New York

Whether you are reroofing a dairy barn in the Mohawk Valley, building an apple storage building in the Champlain Valley, or putting a new roof on a Finger Lakes outbuilding, PBS Direct carries everything in one place.

  • Close-up of green standing seam metal roof panels with water droplets

    Metal roofing and wall panels

    Standard ribbed panels (Ag panels), PBR panels, and standing seam panels in fixed and custom cut-to-length sizes. Available in 26 and 29 gauge across a full range of colors.

  • White barn-style pole building with black garage doors and stone accents

    Pole building kits

    Complete kits that include roofing, siding, lumber, a full trim package, and fasteners. Available in standard sizes from 18x20 up to 50-foot wide structures. Free shipping on all building kits to New York.

  • Dark grey steel building with three garage doors on a concrete lot

    Steel building kits

    Bolt-up steel frame structures with no on-site welding required.

  • Metal trim and flashing profiles in grey, black, green and red

    Trim and accessories

    Ridge caps, rake trim, eave trim, J-channel, and closure strips matched to your panel profile.

  • Metal-to-wood screw with hex washer head, technical drawing

    Fasteners

    Metal-to-wood and metal-to-metal screws sized for the job.

  • Touch Up Paint

    Minor scratches after install? Order the paint exactly matched to your panels for a seamless finish.

Why New York Buyers Order From PBS Direct

  • Flat-rate shipping, no surprises

  • Custom panel lengths

  • Transparent pricing

  • Financing available

  • Built for lake-effect country

    Panels and profiles sized for New York's heavy, drift-prone snow loads, shipped straight to your site with the total posted before you order.

Frequently Asked Questions

Does PBS Direct ship to New York?

How long does delivery take to New York?

Do I need a building permit for a pole barn in New York?

In most of the state, yes. The Uniform Code is administered by your local code enforcement official, and permits are required for most permanent structures. New York City runs its own separate construction codes. Requirements vary by jurisdiction, so check locally before breaking ground.

How much snow load do I design for in New York?

It varies enormously by region. Long Island and the lower Hudson Valley run roughly 20 to 30 pounds per square foot, while the Tug Hill Plateau east of Lake Ontario carries some of the heaviest loads in the country, well above 100 psf. Buffalo, Syracuse, and the Adirondacks are also high. Values adjust with elevation, so confirm your site figure before ordering.

What metal panel is best for New York's climate?

Across most of the state, a standing seam profile with hidden fasteners is the stronger long-term choice because it sheds heavy snow and resists the freeze-thaw and ice-dam damage of an upstate winter. In the milder downstate areas, a ribbed panel in 26 or 29 gauge is also a reliable option.

Ready to order for your New York project?

Browse the full range of metal panels, building kits, trim, and accessories, with pricing posted upfront and flat-rate shipping to NY.

Have questions about your project? Call 1-877-398-8898, Monday through Friday, 7:30 AM to 4:30 PM.