Peak Trim - 10'2" - 29 ga. - CSM Trim

Length = 10 feet 2 inches Girth = 11 inches Made to specified angle • Available in colors that match the roof or wall panel• 29-Gauge steel material• Energy Star listed finish that is...

Overhead Door Trim (Various Lengths) - 26 ga. - CSM Trim

The overhead door trim is a one piece unit, with a wide face to cover the 2×6 jamb boards, and an integrated J. The trim is meant to close in the garage door opening with a clean surface.•...

#10 Wood Screw - 2 inch, Various Colors (Bag - 250 qt) - CSM

#10 Wood Screw - 1-1/2 inch, Various Colors (Bag - 250 qt) - CSM

#10 Wood Screw - 1 inch, Various Colors (Bag - 250 qt) - CSM

29 ga. Bare Galvalume Panel-Loc Plus™ Ribbed Metal Panel - 10', 12', 14', 16'

Panel-Loc Plus gives residential, agricultural, and light commercial projects the protection of steel with an attractive appearance. It features an extra striation on top of the rib to give it...

29 ga. Bare Galvalume Panel-Loc Plus™ Ribbed Metal Panel

Panel-Loc Plus gives residential, agricultural, and light commercial projects the protection of steel with an attractive appearance. It features an extra striation on top of the rib to give it...

(Various Widths) 10'6" Ridge Cap - 29 ga. - CSM Trim

The Ridge Cap is designed to be used with most metal roofing panels. The Ridge Cap, used in conjunction with Closure Strips and Sealant, reliably protects the ridge seam against water infiltration...

Rake & Corner - 29 ga. - CSM Trim (10', 12', 14', 16', 18', 20')

Rake & Corner Trim can be used on outside corners of the building wall panels or on the roof edge rake where roof panels meet. The trim protects the edges and forms a weather-tight seal which...

Inside Corner - 29 ga. - CSM Trim (10'2")

Inside corner trim for metal buildings. It gives an even inside corner – it sits on the outside of the metal.Length = Several options• Available in colors that match the roof or wall panel•...

Gable Trim 10'2" - 29 ga. - CSM Trim

Gable trim, also called Corner Trim can be used on outside corners of the building wall panels or on the roof edge rake where roof panels meet. The trim protects the edges and forms a weather-tight...

Eave Molding 10'2" - Fascia - 29 ga. - CSM Trim

Eave molding trim is used on a building that doesn’t have overhang. The trim is the transition from the roof to cover the facia board. The gutters will be sitting in front of this.• Available in...

Drip Edge 10'2" - 29 ga. - CSM Trim

Drip Edge trim, also called Extended Drip Edge. Install Drip Edge over underlayment, and along every eave. This is normally used as type of drip edge for regular metal roofing and standing seem...

Residential Eave 10'2" - 29 ga. - CSM Trim

Residential Eave trim, also called Extended Drip Edge. Install Drip Edge over underlayment, and along every eave. This is normally used as type of drip edge for regular metal roofing and standing...

Base Angle 10'2" - 29 ga. - CSM Trim

Base Angle is often also called Rat Guard trim, and standard length is 10.6 Ft. Base Angle, is installed at the base of walls. It gives a base for the wall metal panels and t give flashing up behind...

Double Angle 10'2" - 29 ga. - CSM Trim

Double Angle trim is used for transition from one wall metal to another – where you have a split of the side metal panels. The trim gives base for the upper metal and a flashing behind it, and the...

Window Drip Cap 10'2" - 29 ga. - CSM Trim

Drip cap is used over windows and doors to give the water a way to drip off without damaging anything. • Available in colors that match the roof or wall panel• 29-Gauge steel material•...

Mini Corner 10'2" - 29 ga. - CSM Trim

Angle trim is used as drip edge in combination with the post trim on facia board. Its used to make a complete cover for the facia and transition from the roof.• Available in colors that match...

Post Trim 10'2" - 29 ga. - CSM Trim (Various Widths)

Post trim is used to cover the facia board on the end of the roof. It will be the back board for the gutters. • Available in colors that match the roof or wall panel• 29-Gauge steel...

J-Channel 10'2" - 29 ga. - CSM Trim

J-channel flashing is designed specifically for trimming out openings on your wall panels. Windows, doors, and louvers on the walls of your building blend in seamlessly when j-channel is installed...